Posted 20 hours ago

Washing Machine / Dishwasher "Y" Piece Hose Splitter

ZTS2023's avatar
Shared by
Joined in 2023

About this deal

Washing machine and dishwasher inlet hose connectors use a 3/4 inch BSP thread (measures about 1 inch with a ruler), see BSPT link at bottom of page for more information about British Standard Pipe Thread sizes. Consider lagging the pipe or perhaps pour a kettle of hot water over the pipe externally to ensure that the pipes are clear of icy blockages. If your washing machine is located near your sink, it can be a wise choice to connect the washer to your sink waste. Many people are unsure how to connect a washing machine waste pipe to a sink, but it actually isn’t too difficult.

Useful to blank off an unused hot valve if you have a new washing machine that only needs a cold feed.This was delivered very quickly and was packed well fitted to the dishwasher has soon as they arrived and now the door shuts properly and washes correctly. A good solution is to run a spur from a socket to a switched fused connection unit above your work surface, and then a cable from this to an unswitched socket below the surface to serve the machine.

This is a UK and ROI specific subreddit, r/DIY has a lot of US Specific content, things like products to use, where to get them, laws and codes that don't apply to the UK. Just in case, we recommend factoring this into your calculations when budgeting for dishwasher installat. In the USA we no longer do this as evidently our plumbers unions do not allow electricians to check for continuous metal all the way to the street and our electricians unions do now allow plumbers to check for ground wires downstream before replacing a section of metal with plastic. Credit subject to status, UK residents only, Toolstation Ltd, acts as a broker and offers finance from a restricted range of finance providers, PayPal Credit is a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH. Splits one 3/4 inch BSP (standard thread size for the end of washing machine and dishwasher inlet / fill hoses) connection into two, could be used to connect a dishwasher and washing machine or fridge to the same valve.Pop a couple of 22mm snap over pipeclips where the washing machine and dishwasher pipes could come from, just above the valve in that space to the left of the ISO valves, then down onto the y piece. If you wish to fit a 45 cm slimline appliance into a 50 cm opening in your cabinets, there’s a separate fitting kit available that allows you to secure the appliance to the cabinets centrally using the 2.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment